Mwm Tcg3016V16 1000kw Gas Generator Set Open Type for Power Plant/Data Center

• Customization: Available
• After-sales Service: Engineer Train on-Site Commission; Remote Monitor
• Warranty: 12months
• Model NO.: MWM TCG3016V16
• Output Type: AC Three Phase
• Gas Source: Natural Gas
• Certification: CE
• Power: 1000kw
• Standard: Standard
• Frequency: 50Hz
• Speed: 1500rpm
• Electric Efficiency: 40.6%
• Thermal Efficiency: 47.3%
• Speed Regulating Rate: 0-5% Adjustable
• Power Factor: 1.0
• Nox Emissions: 500mg/Nm³@5%O2
• Transport Package: Wooden Case with Heavy-Duty Steel Base
• Specification: 4190×1590×2190, 8650kg
• Trademark: N/A
• Origin: Germany
• Package Size: 12192.00cm * 2438.00cm * 2896.00cm
• Package Gross Weight: 10000.000kg

Product Description

Natural Gas Generator Set General Data Sheet

Continuous Power: 1000kWe, Natural Gas, MN≥80

Generator Set Datasheet			Engine Model	TCG3016 V16		Alternator Model		LSA50.2L8
50Hz, 1500RPM		3Phase, 4Wires		CosΦ=1.0		NOx Emissions  (tolerance -8%)		500mg/Nm³@5%Oxygen (187.5mg/Nm³@15%O2)
Ratings		Prime Power		Continuous Power		Rated Current	Thermal Output	Efficiency
		(PRP)		(COP)				Electrical	Thermal
Voltage (V)		kW	kVA	kW	kVA	A	kW	Total: 87.9%
400/230		/	/	1000	1000	1443.4	1162	40.6%	47.3%
Conditions and Defintions: 1)NOx Emissions: NOx≤0.5g NOX/Nm3 dry exhasut gas at 5% exhaust O2 ; at steady state conditions; 2)Engine Ratings obtained and presented in accordance with ISO 3046-1, No overload permitted.; 3)Cooling of the exhaust gases to 120 ℃, includes heat rejection from jacket water circuit, the value tolerance is ±8%;

Specification

Genset General Specifications

Electrical Output (kW/kVA): 1000/1000

Fuel: Natural Gas

Frequency(Hz): 50
Speed (rpm): 1500

Electrical Efficiency: 40.6%

Thermal Efficiency: 47.3%

Total Efficiency: 87.9%

Speed Regulating Rate: 0~5% Adjustable

Dimension (L*W*H)(mm): 4190*1590*2190

Net Weight (kg): 8650

Thermal Data

Heat Rejection to Exhaust: 650kW

Heat Rejection to Coolant: 634kW

Radiated Heat to Ambient: 33kW

Engine Specifications

Model: TCG3016V16S

Mechanical Power: 1028kWm

Speed: 1500RPM

Configuration/No. of Cylinders: V/16

Bore*Stroke: 132/160mm

Displacement: 35L

Compression Ratio: 11:1

Mean Piston Speed: 8m/s

Engine-management System: ECM

Ignition System +Speed Governor System: All from OEM

Induction System: Mixture Exhaust Turbo Charging

Cooling Mode: Radiator

Exhaust noise@1meter: 132.4dB(A)

Air-borne noise@1meter: 118.4dB(A)

Cooling System		Gas Inlet System
Water volume engine jacket/intercooler	56/5L	Air-Gas mixer	OEM
Jacket water coolant temperature in/out	78/89℃	Inlet gas pressure	15~20 kPa
Intercooler coolant temperature in/out	45/51℃	Aftercooler temperature	50
Engine jacket water flow rate from/to	39/50 m³/h	Combustion Air System
Water flow rate engine jacket water/intercooler	47/12 m³/h	Combustion type	Spark plug ignition
Lubrication System		Combustion mass air flow	5442 kg/h
Total lubricating oil capacity	120 Liters	Combustion air temperature design/rel. Humidity	25℃/60%
Oil consumption	0.1g/kWh	Fuel System
Oil grade	SN	Gas Methane No.	≥80
Induction System		Lower Heat Value (LHV)	36.61MJ/Nm³
Maximum pressure loss in front of air cleaner	5 mBar	Gas Consumption at 100% Load	242 m³/h
Air filter type	Dry	Gas Consumption at 75% Load	198 m³/h
Exhaust System		Gas Consumption at 50% Load	130 m³/h
Exhaust back pressure from/to	30/50 mBar	Electrical System
Exhaust mass flow, wet	5633 kg/h	Starter Motor Voltage	24V
Exhaust temperature	469℃	Starter Motor Power	9kW
Exhaust Manifolds	Dry	Starter Battery 24V, capacity required	286Ah

Alternator Specifications

Manufacturer: L.Somer

Model: LSA50.2L8 (1200kWe)

AVR Model: D350

Number of Leads: 6

Phase: 3 Phase

Power Factor: 0.8

Winding Pitch: 2/3

Degree of protection: IP23

Temperature Rise: H

Insulation Class: H

Power: 1500kVA

Voltage Regulation Accuracy: ±0.5%

Efficiency: 96.9%

Altitude: ≤1000m

Overspeed: 2250RPM

Ambient Temperature: 40℃

Control Panel HAS Cabinet
Programmable logic control (PLC) type, the PLC is programmed with the following basic functions:				Additional Displaying and recording of collective fault messages of all modules (digital inputs), includes:
Engine parameter indicate		Engine protection		Fuse trip of control system
Alternator parameter indicate		Alternator protection		Oil pan overfilled
Three way valve control (engine & intercooler)		Output power control		Oil pan empty
Radiator fan control		Engine and intercooler pump control		Failure fresh oil pump

Standard Features
High efficient water cooled gas engine	Fully welded steel baseframe
Brushless alternators (Class H, with AVR.)	MWM ignition system
Heavy duty rubber anti-vibration mountings	Gas train: ball valve, gas filter, gas pressure regulator, pressure gauge, solenoid valve
24V starter batteries and connecting cables	Automatic oil supply control system
Maintenance free battery	Wiring with IEC standard
Industrial silencer for open type generator sets	Factory test
Circuit Breaker - 3 pole (MCCB)/ACB	Operation & Maintenance manual & diagrams
Oil filter - Air filter	Worldwide product/technical support
Low coolant level sensor

Combined Heat and Power System (CHP)

We offer Combined Heat & Power packages for our gas generator sets. It can recover 75%~90% combined electrical and thermal efficiency, resulting in major reductions in your overall energy costs.

Optional

Automatic Transfer Switch (ATS)

Silent Canopy

Water Heater for Severe Cold Weather

Residential Silencer for open type generator sets

Flame arrestor in gas train

Parallel panel

Full range of attachments and options available for alternator

Drawings & Dimensions

Detailed CAD drawings and dimensional diagrams are available for download here or upon inquiry. Our engineering team can provide tailored designs to meet specific project requirements.

After Sales Service

Standard Warranty: 12 months or 2,000 operating hours (whichever comes first).
Global Support: 24/7 technical assistance and spare parts supply.
Training: On-site or remote operation/maintenance training.