Mwm Tcg2032V16 4.3MW Gas Generator Set for Powerplant & Data Center

• Customization: Available
• After-sales Service: Engineer Train on-Site Commission; Remote Monitor
• Warranty: 12 Months
• Model NO.: MWM2032V16
• Output Type: AC Three Phase
• Gas Source: Gas
• Certification: CE
• Power: 4300kw
• Standard: Standard
• Speed: 1000rpm
• Frequency: 50Hz
• Configuration./No. of Sylinders: V, 16
• Displacement: 272L
• Voltage: 10.5kv
• Electrical Efficiency: 42.7%
• Transport Package: Break Bulk Cargo + Containerized Shipment
• Specification: Dry weight: 52900kg
• Trademark: MWM
• Origin: China
• HS Code: 8502200000

Product Description

12 UNITS IN READY STOCK 

TCG2032V16, 4300kWe Electrical Output, 10500V

Design Conditions

Intake air temperature: 35℃

Intake air humidity: 80%

Altitude: 7m

Exhaust temp. after heat exchanger: 120℃

NOx raw emissions genset (tolerance -8%): 250mg/cubic meter @5% oxygen

Specification

Genset Specifications:

1.Engine: TCG2032V16

2.Speed: 1000RPM

3.Mean Piston Speed: 10.7m/s

4.Configuration: V type

5.Number of Cylinders: 16

6.Bore*Stroke:260mm*320mm

7.Displacement: 272L

8.Compression Ratio: 12.0:1

9.Mean Effective Pressure: 19.4Bar

10.Mean Lube Oil Consumption @ Full Load: 0.2g/kWh

11.Generator: Marelli MJH 800 MC6 or similar (*)

12.Voltage: 10.5kV

13.Voltage Range: ±10%

14.Power Factor: 1.0

15.Frequency: 50Hz

Energy Balance
Load:	%	100
Electrical power COP acc. ISO 8528-1:	kWe	4300
Engine Jacket Water Heat:	kW±8%	1631
Intercooler LT Heat:	kW±8%	322
Lube Oil Heat:	kW±8%	505
Exhaust Heat with Temp. after Heat Exchanger:	kW±8%	2418
Exhaust Temperature:	℃±25℃	457
Exhaust Mass Flow: wet/dry:	kg/h	23852/21588
Combustion Mass Air Flow:	kg/j	23078
Radiation Heat Engine/Generator	kW±8%	218/95
Fuel Consumption:	kW±5%	10066
Electrical/Thermal Efficiency	%	42.7/45.2
Total Efficiency:	%	87.9

System Parameters
Ventilation air flow (comb. air incl.) with ΔT=15K	kg/h	122100
Combustion air temperature minimum/design	℃	5/35
Exhaust back pressure from/to	mBar	30/50
Exhaust volume flow/wet/dry	Nm3/h	18317/16357
Maximum pressure loss in front of air cleaner	mBar	5
Zero-pressure gas control unit selectable from/to	mBar	20/200
Pre-pressure gas control unit selectable from/to	Bar	0.5/10
Air bottle, volume/pressure	L/bar	2000/30
Starter motor	L/s/bar	800/16
Lube oil content engine/base frame	L	1850/-
Dry weight engine/genset	kg	24890/52900

Cooling System

Global content engine jacket water/ intercooler: 35% Vol./35% Vol.

Water volume engine jacket/ intercooler: 570L/51L

KVS/Cv value engine jacket water/ intercooler: 90m³/h/62m³/h

Jacket water coolant temperature in/out: 77℃/90℃

Intercooler coolant temperature in/out: 40℃/45℃

Engine jacket water flow rate from/ to: 105m³/h/65m³/h

Water flow rate engine jacket water/intercooler: 115m³/h/65m³/h

Water pressure loss engine jacket water/ intercooler: 1.7Bar/1.1Bar

Engine jacket water pressure outlet min/max: 2Bar rel./2.5Bar rel.

Lube oil temp. engine inlet max./lube oil flow rate: 80℃/125m³/h

Minimum Loads

Methane Number Sensitivity

Minimum electrical load for short-term operation: 1060kW

Recommended minimum electrical load for continuous operation: 2150kW

Minimum MN for full load: 70

Load: 100%

Intercooler coolant temperature in/out: 40℃

Electrical power COP: 4300kW

Exhaust Emission Data at Engine Out
Electrical power COP	kW	4300
NOx dry	g/Nm3@5% O2	0.25
CO dry	g/Nm3@5% O2	0.79
THC dry	g/Nm3@5% O2	1.31
NMHC dry	g/Nm3@5% O2	0.11
NMNEHC dry	g/Nm3@5% O2	0.04
HCHO Formaldehyde dry	g/Nm3@5% O2	0.14
methane dry	g/Nm3@5% O2	1.20
Exhaust mass flow Carbon Dioxide	kg/h+5%	2083
Carbon Dioxide dry	%	6.4
Oxygen dry	%	9.8

System / Module	Included Scope of Supply (Bare Genset + Core Control System)
1. Core Engine	MWM TCG 2032 / 2032B V16 (50Hz) lean-burn gas engine; natural gas optimized250mg/Nm3 NOx @ 5% O2; incl. multi-gas mixer, turbocharger, electronic ignition, speed/load regulation, and internal pre-lubrication.
2. Alternator	Premium high-voltage synchronous generator (Marelli MJH 800 MC6 / TDPS TD 145 or equivalent); 10.5kV / 11.0kV output; brushless, self-excited, IP23 protection, Class F insulation, with integrated PMG and anti-condensation space heaters.
3. Genset Skid Assembly	Heavy-duty rigid steel base frame; torsion-elastic coupling; full set of elastic anti-vibration spring mountings; integrated crankcase ventilation with oil mist separator; engine coolant preheating system (~20 kW); standard intake air filters (delivered loose).
4. MIP / Control System	MWM Total Electronic Management (TEM EVO) basic control cabinet; features 15" TFT touch operating terminal (BRT), real-time cylinder knock/temperature monitoring, parameterizable I/O, Modbus TCP/IP interface, and integrated electronic logging/history function.
5. Testing & Logistics	Factory acceptance load test without customer participation (FAT report provided); heavy-duty seaworthy VCI shrink-wrapped packing; English (US) labeling/nameplates; 1x standard technical documentation package; standard maintenance tool kit (incl. barring motor).

System / Module	Factory-Furnished Auxiliary Scope of Supply (BOP) (3-months delivery time)
1. Enclosure System	Heavy-duty weather-proof and sound-proof enclosure panels; structural multi-ventilation containers designed for optimal ambient airflow, acoustic attenuation, and thermal management.
2. Cooling & Water System	Industrial remote cooling radiators (horizontal/vertical type); integrated water storage tanks, internal circulating pumps, and expansion cooling piping circuits.
3. Control & Electrical System	Plant master control panels (MCP); plant auxiliary low-voltage distribution boards (MCC) for managing internal lighting, fans, pumps, and localized power distribution.
4. Starting & Compressed Air	Complete compressed air units; high-pressure receiver air tanks, automatic air compressors, and heavy-duty pneumatic starters configured for high-reliability black starts.
5. Thermal Management	Premium industrial boiler package; auxiliary thermal management components, and heat recovery interfaces optimized for Combined Heat and Power (CHP) applications.
6. Exhaust System	High-performance exhaust gas silencers with high acoustic dampening; dedicated mounting arrangements, structural supports, and expansion bellows.
7. Bulk M&E Installation	Pre-fabricated mechanical piping spools, industrial valves, and complete electrical cabling with heavy-duty cable tray accessories pre-installed inside the enclosure.

After Sales Service

Standard Warranty: 12 months or 2,000 operating hours (whichever comes first).
Extended Warranty: Optional coverage up to 36 months.
Global Support: 24/7 technical assistance and spare parts supply.
Training: On-site or remote operation/maintenance training.

FAQ

Q: What's the lead time for orders?
A: Standard models ship in 180 days; customized auxilary system requires 90 days.

Q: Do you provide after-sales service overseas?
A: Yes.

Q: Can I request a customized bucket size?
A: Absolutely! But please discuss with us first.

Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).

Q: How do I place an order?
A: Contact us for a quote, then confirm with a PO.